Plumb Craft Perfect Flush Toilet Kit Instructions
The Plumb Craft Perfect Flush Toilet Kit is designed to help you save water and money by optimizing your toilet’s flushing mechanisms. This kit includes a fill valve, a flapper, and a dual flush converter that allows you to choose between a full flush and a half flush. Installing this kit is easy, and you can do it yourself without the help of a professional plumber.
What You Will Need
Before you begin, you will need the following tools:
- Adjustable wrench
- Flathead screwdriver
- Phillips screwdriver
- Bucket
- Towel or rag
Step-by-Step Instructions
Step 1: Shut Off Water Supply
Locate the water shut off valve behind your toilet and turn it clockwise to shut off the water supply. If you cannot locate the shut off valve, turn off the main water supply to your house.
Step 2: Drain the Tank
Flush your toilet to drain the water from the tank. Use a towel or rag to mop up any remaining water in the tank and bowl.
Step 3: Remove the Old Fill Valve
Use an adjustable wrench to unscrew the nut that holds the old fill valve in place. Lift the old fill valve out of the tank and remove the rubber gasket that seals it to the tank.
Step 4: Install the New Fill Valve
Insert the new fill valve into the hole in the tank. Slide the rubber gasket over the threads of the fill valve and screw the nut onto the threads. Hand tighten the nut and then use the adjustable wrench to tighten it a quarter turn more.
Step 5: Attach the New Flapper
Remove the old flapper and attach the new one to the flush valve assembly. Adjust the chain so that there is some slack but not too much. The flapper should be able to close completely but not get caught on the chain.
Step 6: Install the Dual Flush Converter
Install the dual flush converter onto the overflow tube. Attach the lever to the converter and adjust the rod so that it connects to the flush handle. Test the flush by pressing the handle and making sure that the full flush and half flush options work properly.
Step 7: Turn the Water Supply Back On
Turn the water supply back on by turning the water shut off valve counterclockwise. Let the tank fill with water and then flush the toilet to make sure everything is working properly.
Conclusion
By following these easy instructions, you can install the Plumb Craft Perfect Flush Toilet Kit and start saving water and money today. Remember to turn off the water supply before you begin and test the flush before you finish. With the dual flush converter, you can choose between a full flush and a half flush, depending on your needs. Good luck!